2WA/2NJ/2RK
6-265
Contents
Apply Scandisk to the HDD for data recovery.
Purpose
Execute recovery of HDD management data error by turning the power off while accessing to the
HDD.
Method
1.Press the [Start] key.
2.Select the [Execute].
3.Press the [Start] key to execute scandisk.
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Displays the accumulated CIS lighting time
Purpose
Execute to check the CIS usage.
Method
1.Press the [Start] key.
* :CIS accumulated lighting time is displayed in minutes.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U989 HDD scan disk
(Message: HDD Scandisk)
Items Contents
Execute HDD scan disk request
U990 Clearing the scanner lighting time
(Message: Clear Scanner Lamp ON Time)
Items Contents
CIS Displays the accumulated CIS lamp lighting time
To Next Page
Loading...
