Issue 2.2
Feature Description and Operation Manual
100
Main Menu Sub Menu Entry Remark
[7] MW TO MOBILE-EXT
Enable/disable Message wait call to user’s
registered Mobile phone
Dial 1=On or 0=Off
Configured
DKT stations
[1] SET WAKE UP TIME
Set the Alarm Clock
Dial 4 digit alarm time, dial ‘#’ for repeating
alarm
All
[2] WAKE UP DISABLE Disable Alarm Clock All
[3] ACTIVE CONF ROOM
Open a Conference Room
Dial room number and password
All
[4] DEACTIVE CONF ROOM
Close a Conference Room
Dial room number and password
All
[4] TIME
[5] CALL COVER
ATTRIBUTE
[1] SET PRESELECTED MSG
Dial the message (01 ~ 10 and any
supplementary data (time or date)
All
[5] MESSAGE
[2] SET CUSTOM MSG
Dial each character of Message, 2-digits for
each, max 24 characters
All
[1] RECORD USER
GREETING
Record your VMIB greeting
Dial ‘#’ and record
All
[2] LISTEN TIME / DATE Hear the ipLDK system time and date All
[3] LISTEN STA NUMBER Hear the intercom number of the Station All
[4] LISTEN STA STATUS Hear the status of the Station All
[5] RECORD PAGE MSG Record a Page Message – dial ‘#’ and record All
[6] ERASE USER GREETING Delete the User Greeting All
[7] ERASE PAGE MSG Delete the recorded Page Message All
Outbound Notify Menu Menu for Out call notification of new VM
Email Notify Menu Menu for E-Mail notification of new VM
Record User Name Record the Company Directory User Name
[6] ANNOUNCE
Erase User Name Delete the recorded User Name
[1] LCD DISPLAY
LANGUAGE
Changes LCD Language from System to
English
DKT w/LCD
[2] MBU VERSION DISPLAY Display the System S/W version DKT w/LCD
[3] BGM Dial music source (00 - 08) DKT
[4] REGISTER STA NAME
Enter the Station LCD Display name, 2-digits
for each character
All
[5] SPK/HEADSET
Select On/Off button mode - dial 1 for
Speakerphone operation or 0 for headset use
DKT
[6] HEADSET RING MODE
Select ringer
Dial 1 for Speaker, 2 for headset or 3 for both
DKT
[7] WTU STA NUM RCVR Not used
[8] SERIAL NUMBER Displays the serial number of the DKT DKT w/LCD
[9] PC-PHONE LOCK KEY Displays lock key for PC Phones DKT w/LCD
[7]
SUPPLEMENTARY
[*] USB ALWAYS CALL REC Not used
[0] ATTENDANT Refer to Attendant Services, section 13 Att’d only
[] SYSTEM
[1] RELOCATION OUT
Station database is stored in the temporary
buffer
All
To Next Page
Loading...
