Issue 2.2
Feature Description and Operation Manual
101
Main Menu Sub Menu Entry Remark
[2] RELOCATION IN
Data in temporary buffer is written to new
station port.
All
[3] REGISTER BLUETOOTH DKT w/BTM
[4] BLUETOOTH USAGE DKT w/BTM
[0] HOT DESK LOG IN DKT w/LCD
[*] HOT DESK LOG OUT Logs off of the Hot desk station DKT w/LCD
[#] ENTER ADMIN Access to ipLDK system Admin Admin only
Operation
To change a User Station Program item,
1. Press the [TRANS/PGM] button or dial ‘5 6 3’.
2. Confirmation tone is received.
3. Dial the Main and sub-menu item desired.
4. Follow the entry instructions in the chart above.
5. Press the [HOLD/SAVE] button or, for an SLT, flash.
6. Confirmation tone is received and the new value stored
Consideration
After a menu is programmed, the previous menu list is displayed on the LCD.
Pressing a Flexible button after the [TRANS/PGM] button activates Flexible button
programming (refer to Ref. B).
Pressing the [TRANS/PGM] button moves to the top of the Main menu. Pressing the
[Redial] button, if assigned, moves to the previous menu. Refer to Ref. B to assign a
Redial button.
Accessing a menu item that is not available to the phone will return error tone. Hang-up
or press the On/Off button to return to idle.
Reference
A. Attendant Programming
B. Flexible buttons
To Next Page
Loading...
