ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
29
PGM
112
Flex
Btn
Description Default Values
MSG Scroll
Speed
17 For Korea only, this parameter defines the speed at which SMS and broadcast
notices scroll across the LCD of the station.
0 (Fast) 0 to 7, 0 = fastest and
7 = slowest
Block Back Call 18 When enabled (On), if an SLT, busy on a CO line call, hook-flashes and places
another CO line call, the system will automatically terminate the original CO line call.
This disables Broker Call and assures the SLT user cannot establish an
Unsupervised Conference.
0 (Off) 0 = Off
1 = On
Incoming call
Time Restriction
19 When enabled (On) the duration of an incoming CO line call is limited to the CO Call
Restriction Time (PGM 181, Flexible button 17), the call will disconnect when the
timer expires.
0 (Off) 0 = Off
1 = On
Forced Station
Account Code
20 If this parameter is enabled ‘On’, the station user must enter an Authorization code to
place an outgoing CO call.
0 (Off) 0 = Off
1 = On
Reserved 21
Door Open 22 If this parameter is enabled, the station can activate a Door Open contact with the
Door Open code. Contacts are defined in PGM 168.
0 (Disable) 0 = Disable
1 = Enable
Dummy Station 23 If this parameter is ‘On’, the station will provide Hot Desk service; any agent can
login and employ the station normally.
0 (Off) 0 = Off
1 = On
Emergency
Supervisor
24 If this parameter is ‘On’, the station is allowed to intrude on other busy stations and
force a busy CO line to idle, disconnecting any active call.
0 (Off) 0 = Off
1 = On
To Next Page
Loading...
