ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
56
PGM
129
Flex
Btn
Description Default Values
Email Notification 16 The system can be configured to send an e-mail to the user as notification of a new
voice message.
0 (Off) 0 = Off
1 = On
Authorization
Code (Password)
17 Access to a Voice Mailbox can be password protected, when the user enters the
mailbox, the system will request entry of the password.
Mailbox Number 11 digits
SMTP Server 18 When e-mail notification is on, the SMTP (Simple Mail Transfer Protocol) server IP
address must be configured.
IPv4 Address
Email Address 19 When e-mail notification is enabled, the e-mail address to notify must be configured. 24 Characters
SMTP User Id 20 When e-mail notification is enabled, the iPLDK-60 id on the e-mail server must be
configured.
24 Characters
SMTP Password 21 When e-mail notification is enabled, the iPLDK-60 password on the e-mail server
must be configured.
24 Characters
Company
Directory First
Name
22 For Access from the company directory, the virtual mailbox must be assigned a First
Name. A recorded Name greeting and Last Name are also required. Use two digits
for each character as shown in the Dial Pad Character Chart below.
12 Characters
Company
Directory Last
Name
23 For Access from the company directory, the virtual mailbox must be assigned a Last
Name. Use two digits for each character as shown in the Dial Pad Character Chart
below.
12 Characters
To Next Page
Loading...
