Mazda 6 2002 - Page 70

ENGINE
B29
B
2. Remove the SST.
3. Secure the engine and the transaxle using a
hoist.
4. No.4 engine mount bracket and engine mount
rubber together in one piece.
No.3 Engine Joint Bracket Installation Note
1. Tighten the No.3 engine mount bracket stud bolt.
Tightening torque:
7.013 N·m {71.4132.5 kgf·cm, 62.0115.0
in·lbf}
AME2215W004
AME2213W004
AME2213W005
AME2215W011