© 2004 Microchip Technology Inc. DS70053C-page 6-27
Section 6. Interrupts
Interrupts
6
Register 6-9: IEC1: Interrupt Enable Control Register 1 (Continued)
bit 1 IC7IE: Input Capture Channel 7 Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
bit 0 INT1IE: External Interrupt 1 Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
To Next Page
Loading...
