202 FRONT COVER AND RELAT ED COMPONENTS
Special Service Tools
Table 21 Front Cover, Vibration Damper, Gerotor Oil Pump, Front Engine Mounts, and Gear Train
Special Se r vice Tools
Dial indicator set
Obtain locally
Feeler gauge
Obtain locally
Front seal and wear sleeve installer
ZTSE3004B
Heat Insulated Gloves Obtain locally
H-bar puller
Obtain locally
Hot plate
Obtain locally
Loctite® 569 Hydraulic Sealant Obtain locally
Lower Idler Gear Socket ZTSE4383
Slide hammer puller set ZTSE1879
Straightedge Obtain locally
Thermo-melt crayon, 100 °C (212 °F) Obtain locally
16 mm 12 point impact socket
Obtain locally
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
Need help?
General