Navistar INTERNATIONAL DT 466 Service Manual

INTAKE, INLET, AND EXHAUST MANIFOLDS 89
Specifications
Table 7 Exhaust Manifold Specifications
Allowable warpage (max.) 0.10 mm (0.004 in) overall
Flange thickness (min.) 21.59 mm (0.850 in)
Special Torque
Table 8 Intake Manifold, Inlet and EGR Mixer, and Exhaust Manifold Special Torques
Exhaust manifold mounting torque and sequence. See “Exhaust manifold torque
sequence” (page 85).
Fuel assembly valve
15 N·m (132 lbf·in)
Intake manifold mounting bolts 40 N·m (30 lbf·ft)
Intake plug assembly
25 N·m (18 lbf·ft)
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.

Navistar INTERNATIONAL DT 466 Specifications

General

Brand	Navistar
Model	INTERNATIONAL DT 466
Category	Engine
Language	English