Navistar INTERNATIONAL DT 466 Service Manual

114 EGR COOLER AND TUBING
Special Torque
Table 10 EGR Cooler Special Torques
Constant tension EGR hose clamps (if equipped) 3.4 N·m (30 lbf·in)
EGR cooler mounting bracket lower bolt, M12 x 120 116 N·m (85 lbf·ft)
EGR cooler mounting bracket 116 N·m (85 lbf·ft)
EGR cooler supply tube retaining bolt 15-22 N·m (11.3-16.2
lbf·ft)
Special Service Tools
Table 11 EGR System Special Service Tools
EGR cooler pressure test plates ZTSE4636
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.

Navistar INTERNATIONAL DT 466 Specifications

General

Brand	Navistar
Model	INTERNATIONAL DT 466
Category	Engine
Language	English