FUEL SYSTEM 349
2. Carefully remove each fuel injector assembly.
Remove and discard two external O-rings and
the nozzle gasket from each injector; put each
injector into an oil filled plastic container and
close container.
NOTE: If any nozzle gaskets were missing on any of
the removed injectors, check the bottom of the injector
sleeves. Remove gaskets and discard.
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
