458 APPENDIX C – SPECIAL SERVICE TOOLS
Table 98 Crankcase, Crankshaft and Camshaft Special Service Tools
Cam gear puller ZTSE4411
Camshaft bushing puller ZTSE2893B
Hot plate
Obtain locally
Nylon brush
ZTSE4389
Tap, cylinder head bolt holes
ZTSE4671
Tap se t
ZTSE4386
Stiff nylon brush ZTSE4392
Table 99 Oil System Module and Secondary Filter Special T
ools
Air Pressure Regulator
Obtain locally
Oil CoolerTest Plate ZTSE4654
Oil Filter Wrench ZTSE1879
Slide Hammer Puller Set Obtain locally
Table 100 Fuel System Special Service Tools
Cap kit, injectors ZTSE4660
Fuel injector rack cups
ZTSE4645
Fuel injector remover tool (#40 Torx®) ZTSE4524
IPR removal / installation tool ZTSE4666
Loctite® 246 Threadlocker Obtain locally
Table 101 Flywheel and Flywheel Housi
ng Special Service Tools
Crankshaft timing disk puller (H-bar) Obtain locally
Dial indicator with magnetic base
Obtain locally
Guide pins Obtain locally
Rear seal installer
ZTSE4637
Slide hammer puller set ZTSE1879
Table 102 Engine Brake Special Service Tools
Feeler gauge (long) Obtain locally
EGES-265-2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
To Next Page
Loading...
Need help?
General