NEC UNIVERGE SV8500 - Page 101

– 54 –
CHAPTER 2 Operations of SV8500 Server
• SYS1, INDEX 89, 90 — Routine Diagnosis Items: The item corresponding to each bit is to execute
once a day.
• Single System Configuration
INDEX89 b1 — DM Check (DM = Data Memory)
0/1 = No/Yes
b4 — Trunk Ineffective Hold Check Note 1
0/1= No/Yes
b5 — Trunk Ineffective Hold Detection Note 1
0/1 = No/Yes
INDEX90 b1 — Backup of Call Forwarding, Individual Speed Data, Name Display Data, User As-
sign Soft Key Data and Number Sharing Data to Flash Card (see Index 304)
0/1 = No/Yes
INDEX304 b0 — Individual Speed Calling Data Saving
0/1 = Out/In Service (This data is valid when SYS1, INDEX 90, b1=1)
b1 — Call Forwarding Data Saving
0/1 = Out/In Service (This data is valid when SYS1, INDEX 90, b1=1)
b3 — Name Display Data Saving
0/1 = Out/In Service (This data is valid when SYS1, INDEX 90, b1=1)
b4 — User Assign Soft Key Data Saving
0/1 = Out/In Service (This data is valid when SYS1, INDEX 90, b1=1)
b5 — Number Sharing Data Saving
0/1 = Out/In Service (This data is valid when SYS1, INDEX 90, b1=1)
b6 — Call Block Data Save
0/1 = Out/In Service (This data is valid when SYS1, INDEX90, b1=1)
INDEX305 b1 — CFL (Call Forwarding-Logout) Data Save
0/1 = Out/In Service (Data is valid when SYS1, INDEX90, b1=1)
b2 —Dterm
IP SPD (One-Touch Speed Calling) Data Save
0/1 = Out/In Service (Data is valid when SYS1, INDEX90, b1=1)
b3 — DM/LDM/NDM Data Saving
0/1 = Out/In Service (This data is valid when SYS1, INDEX90, b1=1)
INDEX306 b0 — Phone book Data Save
0/1 = Out/In Service (Data is valid when SYS1, INDEX90, b1=1)
Note 1: When these features are executed while the bit 0 of ASYDL SYS1 INDEX1034 is set to 1, Virtual Reg-
ister Ineffective Check is also enabled.