NEC UNIVERGE SV8500 - MBCT Make-Busy of Connection Trunk for LDM

– 874 –
CHAPTER 7 Maintenance Commands
MBCT: Make-Busy of Connection Trunk for LDM
1. Functional Outline
This command is used to set/reset the make-busy state of a connection trunk.
2. Parameters
Input Data
C_RT: Connection Route Number [1-1023]
C_TK: Trunk Number [1-4095]
MB: Make-Busy Information [0-1]
0=Make Idle
1=Make Busy (Outgoing)