– 490 –
CHAPTER 3 System Messages
35-I: SP Process Stop
This message displays the major failure information related to WLAN Handset/Standard SIP process. Note 1
Note: Refer to “35-F” for “Terms for outputting system message” and “Note”.
Note 1: WLAN Handset/Standard SIP process controls the following terminals in SP.
- VoWLAN dual terminal/VoWLAN terminal/Standard SIP terminal/Standard SIP Video terminal
Kind of process (KIND)
Note 2
Kind of warning (FNC) Note 2
SIP server ID of WLAN Handset/
Standard SIP process (ID)
Note 2
Default Alarm Default Grade Grade Modified Lamp Modified
MJ 3
1: XXXX XXXX XXXX XX00 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
1 2 3 4
b0-b7: 01H = WLAN Handset/Standard SIP process
1
b0-b7: 01H = Service Stop. (When SIP Wireless Terminal Backup is not
executed.)
02H = SIP Wireless Terminal Backup Service Stop.
2
b0-b7: SIP server ID (1-127)
When FNC is 01H: SIP server ID of
SP whose operation is stopped.
When FNC is 02H: SIP server ID of
SP that is stopped later than other SP
of two SP executing SIP Wireless Terminal Backup.
3
To Next Page
Loading...
