NEC UNIVERGE SV8500 - DISD Display of IP Station Data

– 801 –
CHAPTER 7 Maintenance Commands
DISD: Display of IP Station Data
1. Functional Outline
This command is used to display the Registration status of IP Stations. This command is usually used to check
the Registration status of IP Stations before the replacement of PH circuit card.
Note: Assign Station Number or LENS of PH, then click the Get button to display the status of the appropriate
IP Stations in Detail data list.
Note: When displaying the status of terminals connected to Analog MC, MAC field in Detail data list shows
“STN MAC”.
Note: To reset WLAN Handset (MH Series), select “Station” on the View Type parameter and “Tele-
phoneNumber (NDM)/Telephone Number (LDM)” on the Kind of Station parameter.
2. Parameters
Input Data
ViewType: Select the item to be displayed.
•Station
•PH Control
• IPCS/IPZT
• Gate Keeper
• Voice Server
• SIP Server
•MPH
•PHI
When ViewType = Station:
Kind of Station: Select the item to be displayed:
• StationNumber: Physical Station Number
• TelephoneNumber (NDM): Telephone Number for Network Data Memory
• TelephoneNumber (LDM): Telephone Number for Local Data Memory
TN: Enter Tenant Number Note 1
STN: Enter Station Number Note 1
Note 1: This parameter is valid when “Station Number” is selected as Kind of Station.
UGN: Enter User Group Number Note 2