NEC UNIVERGE SV8500 - O SMDR Output Buffer Overflow Alarm

– 277 –
CHAPTER 3 System Messages
6-O: SMDR Output Buffer Overflow Alarm
This message displays when the SMDR output buffer usage rate has exceeded the value assigned to ASYD,
SYS1, INDEX 249.
Detail Information
(a) FS = 0, FE = 0/1
Default Alarm Default Grade Grade Modified Lamp Modified
SUP 1
1: XXXX XXXX 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b0
1
2
3 4
b0-b3: FS
b4-b7: FE
This system message varies depending on the data.
FS FE MEANING
(a) 0 0 SMDR output buffer usage rate exceeds the value
assigned by ASYD, SYS1, INDEX 249.
(a) 0 1 After SMDR output buffer usage rate exceeds the
value assigned by ASYD, SYS1, INDEX 249,
usage rate lowered less than the value assigned by
INDEX 250.
(b) 1 0 -
(c) 2 0 Data output is impossible due to SMDR apparatus
failure.
1
b0: 0/1 = Data assigned by the ASYD, SYS1, INDEX 249, 250 is valid/
invalid
2