NEC UNIVERGE SV8500 - CBCV Control of Broadcasting for VNDM

– 730 –
CHAPTER 7 Maintenance Commands
CBCV: Control of Broadcasting for VNDM
1. Functional Outline
This command is used to broadcast the VNDM data from the C-VNDM to all of the L-VNDMs on the FCCS
network.
Note 1, Note 2, Note 3
This command is available only at the node that has the C-VNDM.
(ASYDN/ASYDL: SYS1, INDEX533)
2. Parameters
Input data
INTERVAL: Interval time of Scan (1-99 seconds)
Output Data
FPC: Fusion Point Code (1-253)
Green: Normal End
Red: Abnormal End
White: No Broad Cast Request
Note 1: Variable Network Data Memory (VNDM)
-VNDM is the memory associated with monitored number and available OAI Facilities (Subscribe) in-
formation.
-VNDM is controlled by one node (VNDM Primary Node) in an FCCS network and broadcasted to the
other nodes.
Note 2: Center-VNDM (C-VNDM)
This is the primary VNDM. It is only present in the VNDM center node in an FCCS network.
Note 3: Local-VNDM (L-VNDM)
This is the copy of VNDM located in all other local nodes in an FCCS network.