NEC UNIVERGE SV8500 - H Bandwidth Warning Recovery

– 506 –
CHAPTER 3 System Messages
36-H: Bandwidth Warning Recovery
This message displays when used bandwidth drops to below the warning value after the bandwidth warning.
Output of this message can be controlled by using the office data settings (ABNDL). For more details refer to
Office Data Specifications.
A Location ID
B Location ID
Default Alarm Default Grade Grade Modified Lamp Modified
NON
1: XXXX XXXX 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 00 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b15 b14 b13 b12 b11 b10 b9 b8
b7 b6 b5 b4 b3 b2 b1 b0
b15 b14 b13 b12 b11 b10 b9 b8
1
2
b0-b15 = A Location ID that recovered from the bandwidth warning
1
b0-b15 = B Location ID that recovered from the bandwidth warning
2