– 880 –
CHAPTER 7 Maintenance Commands
MBRT: Make-Busy of Route
1. Functional Outline
This command is used to assign IDLE/BUSY status for all the trunks in the route designated.
2. Parameters
Input data
RT: Route Number of the external route/internal route. Table 7-1 provides the meaning of
the internal route number.
MB: Make-Busy Information [0-1]
0=Make Idle
1=Make Busy
Table 7-1 Route Number Explanation
DATA MEANING DATA MEANING
901 Attendant/Desk Console 902 Originating Register Trunk
903 Incoming Register Trunk 904 MF Receiver
905 Sender Trunk DP/PB 906 PB Receiver for Automated Attendant Service
907 AMP 908 Not used
909 Three-Way Conference Trunk 910-912 Not used
913 Three-Way Conference Trunk for ATTCON 914 Not used
915 Night Attendant Console 916 MFC Register
917 MFC Sender 918 Not used
919-926 Modem 927, 928 Not used
929 Data Signaling Trunk-Option 930 Rate Adapter Conversion Trunk
931-947 Not used
To Next Page
Loading...
