– 435 –
CHAPTER 3 System Messages
26-W:LAN Interface Release Report
This message displays when the LAN Interface Connection Failure, detected in System Message [26-V],
recovers. The message displays when the LAN Interface Connection Failure is restored. The first data is
normally sent/received by the recovered application equipment.
- IP Address for external equipment in which error has been detected. (HEX)
, Socket number (Used Socket number) (HEX) - Socket Number used by application whose failure has been
received.
Error Code (TCP/IP Error Code) (HEX)See Table 3-1.
Application Type
Default Alarm Default Grade Grade Modified Lamp Modified
NON
TCP/IP Application
1: XXXX XXXX XXXX 00XX 2: XXXX XX00 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
1 2 3 4 5 6
7
8 9
10
1
4
5
6
7
8
b0-b7: (HEX)
01=SUPER SERVER
02=MAT
03=SMDR
04=MCI
05=OAI
06=PMS
07=MIS
08=NMS
09=CS Report
To Next Page
Loading...
