– 245 –
CHAPTER 3 System Messages
3-L: Line Fault Release
This message indicates that A wire and B wire of the line between the LC circuit card and telephone set, which
once short-circuited (cf. 3-K “Line Fault” (Page 240)), have become normal.)
Note: This message is available in Australia only.
Location of the faulty line (G, U, MG No.)
Location of the faulty line (level number)
Default Alarm Default Grade Grade Modified Lamp Modified
SUP 1
1: XX0X 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b2 b1 b0
1 2
1
b0-b4: Group number
b5, b6: Unit (0-3)
b7: Module Group
0/1 = Even-numbered MG/Odd-numbered MG
2
b0-b2: Level Number (0-7)
To Next Page
Loading...
