– 698 –
CHAPTER 7 Maintenance Commands
AONE: Assignment of One Activation Password Data
1. Function Outline
This command is used to assign the Software Keycode of the Generic Software when login to the PCPro became
unavailable by system changeover of the dual configuration system. This command can be used only for three
days after it is last used. User needs to initialize the system when desired to use this command again after three
days of the use.
Note: This command is used when one side of the TP has fault and login to PCPro is unavailable.
2. Parameters
Input Data
<Software Keycode>
Assign the Software Keycode labeled on BASIC SOFTWARE (1/2) CD-ROM, then click the Set
button.
To Next Page
Loading...
