NEC UNIVERGE SV8500 - V PCI Card Failure Recovered

– 254 –
CHAPTER 3 System Messages
4-V: PCI Card Failure Recovered
This message displays when the PCI card, which was detected as faulty, is recovered.
Detection of LAN connector fault
release
LAN3 connector fault release status
LAN3 connector fault release status
LAN1 connector fault release status
LAN4 connector fault release status
Default Alarm Default Grade Grade Modified Lamp Modified
MN 3
1: 0X0X 0X0X 0X00 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b3 b2 b1 b0
b7 b1 b0
b7 b0
b7 b0
b7 b1 b0
1
2
3 54
b0: 0/1 = -/LAN3 connector fault release
b1: 0/1 = -/LAN2 connector fault release
b2: 0/1 = -/LAN1 connector fault release
b3: 0/1 = -/LAN4 connector fault release
1
b0: 0/1 = -/F-BUS Link release
b1: 0/1 = -/P-BUS Link release
2
b0: 0/1 = -/External Ether Link fault release
3
b0: 0/1 = -/External Ether Link fault release
4
b0: 0/1 = -/F-BUS Link release
b1: 0/1 = -/P-BUS Link release
5