– 90 –
CHAPTER 2 Operations of SV8500 Server
8. SYSTEM CONTROL PROCEDURES
Although the system is maintenance free, maintenance technicians occasionally may confront a situation in
which they have to manually control the system. This section describes system control procedures focusing on
the following items.
• How to Change over CPU Card
• How to Control Switching Block
• Manual Changeover of Speech Path System
• Manual Changeover of PLO
8.1 Changeover of CPU/TSW/PLO
8.1.1 General
This section explains the system operations that are necessary for changeover of CPU/TSW/PLO.
Before performing these operations, see Figure 2-6 through Figure 2-9 to obtain general understanding
on the system configuration.
To Next Page
Loading...
