– 504 –
CHAPTER 3 System Messages
36-G: Bandwidth Warning
This message displays when used bandwidth exceeds the warning value defined between location IDs. Once this
message is displayed, the message has not been output until its recovery. Output of this message can be
controlled by using the office data settings (ABNDL). For more details refer to Office Data Specifications.
A Location ID
B Location ID
Note: Location IDs are set to A LOC-ID and B LOC-ID in ascending order. (A LOC-ID < B LOC-ID)
Default Alarm Default Grade Grade Modified Lamp Modified
NON
1: XXXX XXXX XXXX XXXX 2: XXXX XXXX 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 00 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b15 b14 b13 b12 b11 b10 b9 b8
b7 b6 b5 b4 b3 b2 b1 b0
b15 b14 b13 b12 b11 b10 b9 b8
4
1
2
3
b0-b15 = A Location ID that exceeded the warning value
1
b0-b15 = B Location ID that exceeded the warning value
2
To Next Page
Loading...
