– 274 –
CHAPTER 3 System Messages
6-N: Abnormal Call Duration Data
This message displays when the system detects abnormal duration in the line connection between the calling
and called party. When the calling and called party establish a line connection and continue the hook-up for an
extremely short or long period of time [predetermined by the ASYD command (SYS1, INDEX 45, 46)], this
message is created.
Calling party information
Tenant number of Calling/Called party (HEX)
Calling party Information
When calling party is Station
Calling station number (See table.)
Default Alarm Default Grade Grade Modified Lamp Modified
NON 0
1: XXXX XXXX XXXX XX00 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XX00
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b3 b2 b1 b0
b7 b3 b2 b1 b0
1 2 2
3 3 3 3
4
5 5 5
5 5 5 5 5 5 5 5 5 5
b0-b3: Type of Calling party
0 = Station
1 = Attendant console
2 = Trunk
b7: 0/1 = Short/Long Time
1
2
3
b4-b7 b0-b3
DC0 DC1
DC2 DC3
DC4 DC5
To Next Page
Loading...
