NEC UNIVERGE SV8500 - F SP Process Information

– 481 –
CHAPTER 3 System Messages
35-F: SP Process Information
This message displays the event information related to WLAN Handset/Standard SIP process. Note 1
Note 2: WLAN Handset/Standard SIP process controls the following terminals in SP.
- VoWLAN dual terminal/VoWLAN terminal/Standard SIP terminal/Standard SIP Video terminal
Kind of process (KIND)
Kind of information (FNC)
Note 2
SIP server ID of WLAN Handset/
Standard SIP Process (ID)
Note 2
Default Alarm Default Grade Grade Modified Lamp Modified
NON 0
1: XXXX XXXX XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XX00 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
2 3 4 51 6
b0-b7: 01H = WLAN Handset/Standard SIP process
1
b0-b7: 01H = Service Start.
02H = Reset Indication from MAT.
03H = ACT Change Indication from MAT.
2
b0-b7: SIP server ID (1-127)
When FNC is 01H: SIP server ID of
SP whose operation is started.
When FNC is 02H: SIP server ID of
SP to reset
When FNC is 03H: SIP server ID of SP that is active when changeover
direction is received.
3