– 482 –
CHAPTER 3 System Messages
IP address of WLAN Handset/Standard SIP process (IP) Note 2
When FNC is 01H: IP address of SP whose operation is started.
When FNC is 02H: IP address of SP to reset
When FNC is 03H: IP address of SP that is active when
changeover direction is received.
Number of speech channels for
WLAN Handset/Standard SIP
process (CH NO)
Note 2
Status of WLAN Handset/Standard
SIP process (ST)
Note 2
Note 3:
Available when “KIND = 01H“.
IP address ** ** ** **
b7 b6
b5 b4 b3
b2
b1 b0
b0-b7: IP address
b7 b6
b5 b4 b3
b2
b1 b0
b0-b7: IP address
b7 b6
b5 b4 b3
b2
b1 b0
b0-b7: IP address
b7 b6
b5 b4 b3
b2
b1 b0
b0-b7: IP address
b7 b6 b5 b4 b3 b2 b1 b0
b15 b14 b13 b12 b11 b10 b9 b8
b7 b6 b5 b4 b3 b2 b1 b0
4
1
2
3
4
1
2
3
4
b0-b15: Number of speech channels for WLAN Handset/Standard
SIP process
(0-1200)
When FNC is 01H: Number of speech channels for
SP whose operation is
started.
When FNC is 02H: Number of speech channels for
SP to reset
When FNC is 03H: Number of speech channels for
SP that is active when
changeover direction is received.
5
b0-b7: 00H = No status
01H = Single (When SIP Wireless Terminal Backup is not
executed.)
02H = Active
03H = Standby
When FNC is 01H: Status of
SP whose operation is started.
When FNC is 02H: Status of
SP to reset.
When FNC is 03H: Fixed to active.
6
To Next Page
Loading...
