– 193 –
CHAPTER 2 Operations of SV8500 Server
16.3Programming
FTP Server Startup Assignment
STEP 1 Select LAN1 for Select LAN Interface.
STEP 2 On Options tab, select “Activation setting of Internal server” in function list of LAN1 field, and
then click the Execute button.
STEP 3 On Activation setting of Internal server window, check the checkbox of “FTP Server” in In-
ternal Server list of LAN1 field to ON. Then click the Set button.
Maintenance User Account Assignment
STEP 1 Select LAN1 for Select LAN Interface.
STEP 2 On Options tab, select “Maintenance User Account Settings” in function list of LAN1 field, and
then click the Execute button.
STEP 3 On Maintenance User Account Settings window, click the Add button.
STEP 4 Maintenance User Account Settings sub-window appears. Enter the following parameters,
and then click OK button.
- Login Name: 4~12 characters, “-”, “_”
- Password: 4~12 characters, “-”, “_”
- FTP: Check to allow.
Note: Refer to ADTM: Assignment of Data for TCP/IP Module in Command Manual for available characters
to enter the Login Name and Password.
Note: Level is Low and it is fixed.
STEP 5 On Maintenance User Account Settings window, click the Set button.
FTP Server Cancelation
STEP 1 Select LAN1 for Select LAN Interface.
STEP 2 On Options tab, select “Activation setting of Internal server” in function list of LAN1 field, and
then click the Execute button.
STEP 3 On Activation setting of Internal server window, check the checkbox of “FTP Server” in In-
ternal Server list of LAN1 field to OFF. Then click the Set button.
Maintenance User Account Deletion
STEP 1 Select LAN1 for Select LAN Interface.
To Next Page
Loading...
