– 881 –
CHAPTER 7 Maintenance Commands
MBRT_LR:Make-Busy of Route - Logical Route Number
1. Functional Outline
This command is used to assign Idle/Busy status of all the trunks in the logical route designated. Route number
of the MBRT command can be assigned by using logical route.
Note: When logging in to the NCN (Network Control Node), the data of other LN (Local Node) can be changed.
If logging in to a LN, only the DM of self-Node can be changed by this command.
2. Parameters
Input data
LGRT: Logical route number allocated to the external/internal route. Refer to the MBRT com-
mand as to the Internal route number and its meaning. Note 1
MB: Make-Busy Information
Make Idle
Make Busy
Output Data
FPC: Fusion Point Code [1-253] Note 2
RT: External Route Number
Note 1: Prior to this command, logical route number must be allocated by using the ALRTN command.
Note 2: After entering attributes in LGRT and MB then clicking Write button, this parameter becomes avail-
able.
To Next Page
Loading...
