NEC UNIVERGE SV8500 - DFLN Display up of Location Free Numbering

– 791 –
CHAPTER 7 Maintenance Commands
DFLN: Display Up of Location Free Numbering
1. Functional Outline
This command is used to check the assigned data of Location Free Numbering Service. When this command is
activated, the assigned data are displayed on a basis of each designated station number.
2. Parameters
Input data
FUNCTION: Function Type
•ID-No
•STN
L-STN: Logical number (ID-No) [Maximum six digits]
Note 1
TN: Tenant Number [1-63] Note 2
P-STN: Physical Number (Station Number) [Maximum six digits] Note 2
Output data
RSC: Route Restriction Class [0-15]
SFC: Service Feature Class [0-15]
DC: Digit Code [0-9,*,#]
Note 1: This parameter is entered/displayed only when F=0.
Note 2: This parameter is entered/displayed only when F=1.