– 164 –
CHAPTER 2 Operations of SV8500 Server
data is loaded or saved last time.
2. In FCCS system, redundant Data Memory can be applied to all nodes by logging in Network Control Node
(NCN).
3. Office data in Drive B of the CF card will be loaded in the following situation.
• The system is turned on.
• “Program & Office Data Load & System Initialize” is executed by the SINZ command.
• “Restart” is executed by the SINZ command.
11.2.2 Programming
Redundant Data Memory Backup can be done by following the predeclare steps in Redundant Data Memory
Backup Procedure.
Note: Office data that is saved from MEM to CF card by using MEM_HDD command can be saved in other
storage device. Use PCPro Tools for this backup. See “Office Data Backup” - “<How to Download the
Office Data>” for more details.
To Next Page
Loading...
