NEC UNIVERGE SV8500 - DIPI Display IP Equipment Information

– 798 –
CHAPTER 7 Maintenance Commands
DIPI: Display IP equipment Information
1. Functional Outline
This command is used to display the information of IP terminals. Information can be displayed by pressing the
Execute button. Information displayed can be output to the CSV file by pressing the CSV File Output button.
2. Parameters
[Output Key Data]
Terminal
DtermIP: DtermIP
SoftPhone (SP20): DtermSP20 and DtermSP30 used as ACD terminal
Inaset: DtermIP INASET
SoftPhone (SP21): Not used
Softphone (SP30): Not used
Media Converter
Analog MC: Analog 2 port MC
CS
IPCS/IPZT: IP-BS
Gateway
Gate Keeper: GK(Gatekeeper)
SIP Server: SIP Server
VPS
IPVPS: Not used
Media Gateway
ISDN Trunk(BRI): MG(BRI)
ISDN Trunk(PRI 1.5M): MG-PRI/PRA
ISDN Trunk(PRI 2.0M): MG-PRI/PRA
SIP-MG: MG(SIP)
MG(COT): MC & MG with PFT
MC-MG(7COT): Not used
MG(6COT): Not used
B2BUA-SIP GW-4ch: Back-to-Back User Agent (4 channels)