NEC UNIVERGE SV8500 - K Fusion Health Check Report (Recovery)

– 510 –
CHAPTER 3 System Messages
36-K: Fusion Health Check Report (Recovery)
[36-K] Fusion Health Check Report (Recovery) message is output when Fusion Health check succeeded after
[36-F] Fusion Health Check Report (Temporary/Permanent) or [36-T] Fusion Health Check Report (Permanent)
is output.
Type of Message
Type of Health Check
Health Check Interface
FCH Number
Default Alarm Default Grade Grade Modified Lamp Modified
NON - -
1: XXXX XXXX XXXX XX00 2: XX00 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
1 2
3 4 5 6
7
03H=Fusion link restore
1
01H=Health check to FCCH
02H=Health check to other node without FCH in LANI-A
03H=Health check to other node without FCH in LANI-B
04H=Health check to Point-to-Point Fusion A
05H=Health check to Point-to-Point Fusion B
2
01H=Health check to LANI-A
02H=Health check to LANI-B
03H=Time out on Peer-to-Peer Fusion A
04H=Time out on Peer-to-Peer Fusion B
3
00H=Health check between nodes without FCH
01H-FFH: FCH number
4