NEC UNIVERGE SV8500 - CFCS Control of Flash Card System

– 737 –
CHAPTER 7 Maintenance Commands
CFCS: Control of Flash Card System
1. Functional Outline
This command is used to perform SVI loading and checksum verification.
2. Parameters
• Main Screen
Input Data
System: Select the system to be executed.
System 0
System 1
Control Type: (Not used)
SVI Load and Checksum verify: SVI Load and checksum are performed.
Buttons
Execute: Execute the selected item on the screen. Selecting “Option “from “Drive Select” menu
displays Drive Selection Screen, which enables you to select the drive to be verified.
Display Issue: Display the program file issue.
Verify Checksum: Verify the checksum manually.
Exit: Exit this command.
• Display Screen
This screen is displayed when clicking Display Issue button.
Output Data
System 0: The detailed information on each program is displayed on the screen.
System 1: The detailed information on each program is displayed on the screen.
Buttons
Close: Close this screen.
• Manual Checksum Verification Screen
This screen is displayed when clicking Verify Checksum button.