– 689 –
CHAPTER 7 Maintenance Commands
CHAPTER 7 Maintenance Commands
1. GENERAL
This chapter explains various commands and list up commands that are used in the system administrative
management procedure. The table below shows the list of commands.
Table 7-1 Command List
COMMAND COMMAND FULL NAME REMARKS
AACT Assignment of Activation Code
ALLC Assignment of Line Load Control
ALMG Assignment of Alarm Grade Data
AONE Assignment of One Activation Password Data
ASECL Assignment of Security Data (LDM)
ASSW Assignment of Soft SW Data
ATDL Assignment of Terminal for Download
ATRF Assignment of Traffic Measurement Order
ATRFN Assignment of Traffic Measurement Order for FCCS Network
AVERN Assignment of Software Version Information (NDM) For Fusion Network
BOSD Back Up One-Touch Speed Call Memory Data
CADSD Continuous Assignment of Station Data
CARR Continuous Assignment of Alternative Route Restriction
CARRN Continuous Assignment of Alternative Route Restriction for NDM
CATK Continuous Assignment of Trunk Data
CBCN
Control of Broadcasting for NDM
CBCV
Control of Broadcasting for VNDM
CBKS
Control Backup Station
CBND
Calculate Bandwidth Data
CCSE Change of Common Signaling Channel Equipment
CDBU Change of Dch Backup
CFCS Control of Flash Card System
CLPB Control of Local Phone Book
CMNT Control of SR-MGC Maintenance Data (LDM)
CMOD Change of System Mode
CMWL Control Message Waiting Lamp
CMWL_T Control Message Waiting Lamps – Telephone Number
To Next Page
Loading...
