NEC UNIVERGE SV8500 - R Call Trace

– 425 –
CHAPTER 3 System Messages
26-R: Call Trace
This message is issued when a call, originated via a station/trunk, is judged as malicious, and then, the details
on the call are traced with the called party pressing an access code or the Call Trace key.
When a call is originated from a station
• Information on Called Party (Informer)
Fusion Point Code (FPC) (HEX)
Note 1
Tenant number (HEX) Note 1
Physical Station number (HEX) Note 1
User Group Number (UGN) (HEX) Note 1
Telephone number (HEX) Note 1
Default Alarm Default Grade Grade Modified Lamp Modified
NON 2
1: XXXX XXXX XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: XXXX XXXX XXXX XXXX
4: XXXX XXXX XXXX XXXX 5: XXXX XX00 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
1
2
3
5
6
7 8 9
10
11
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
1
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
2
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
DC4 DC5
3
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
4
b4 - b7 b0 - b3 b4 - b7 b0 - b3
DC0 DC1 DC8 DC9
DC2 DC3 DC10 DC11
DC4 DC5 DC12 DC13
DC6 DC7 DC14 DC15
5
1
2
3
4
5