NEC UNIVERGE SV8500 - RDPD Removal of Dterm IP Password

– 897 –
CHAPTER 7 Maintenance Commands
RDPD: Removal of Dterm IP Password
1. Functional Outline
This command is used to delete the password of IP Enabled Dterm. The IP Enabled Dterm assigns the password
for logging in to the SV8500 for security use. This is a command to delete the IP Enabled Dterm’s password
from PCPro side.
2. Parameters
Input Data
TYPE: Input Station Type
STN: Station Number
TELN: Telephone Number
When STN is selected in Type
TN: Tenant Number
STN: Station Number (Physical Number)
When TELN is selected in Type
UGN: User Group Number
TELN: Telephone Number
Output Data
DPD: Password for IP Enabled Dterm
Note: When the IP Enabled Dterm has already assigned a password, for personal security, asterisks (*) are
displayed on the screen instead of the password.
Buttons
Get: Display a password assigned on the station/tenant.
Delete: Delete a password assigned on the station/tenant.
Exit: Exit this command.