NEC UNIVERGE SV8500 - COSSN Control of SIP Server Data for NDM

– 755 –
CHAPTER 7 Maintenance Commands
COSSN:Control of SIP Server Data for NDM
1. Functional Outline
This command can display the link status of SP. Use COSSL for stand-alone system or COSSN in the FCCS
network.
2. Parameters
Input Data
<SIP Server Status>
FPC: Fusion Point Code [1-253]
<Channel Status>
SIP Server ID: ID of SP [1-127]
FPC: Fusion Point Code [1-253]
CNT Specified Type: Select the way to specify the CNT
Individual: Execute the reset transaction for Specified individual CNT
Continuation: Execute the reset transaction for Specified continuous CNT
ALL: Execute the reset transaction for all listed CNT
CNT: When the Specified Type of CNT is selected, input CNT (Count) to execute reset transaction with the
following procedure.
Note: If ALL is selected, CNT input is not required.
Output Data
<SIP Server Status>
SIP Server ID: ID of SP [1-127]
LINK: Status of link on the SP
ACHANNEL: Already assigned number of Speech Channels [3-1200]
OCHANNEL: Operating number of Speech Channels [3-1200]
NAME: SP Name
IP Address: IP address of SP