– 52 –
CHAPTER 2 Operations of SV8500 Server
3.5 Initialization by Turning OFF and ON the System
This section explains how to start up the system that has been shut down for some reason. If the system
cannot be initialized by the SINZ/PCPro Tools/INIT key, shut down the system and restart the system by
this procedure. Available initialization type is as follows:
• Office Data Load & Program Load (& OS Load) Initial
3.5.1 How to Start Up the System by Turning OFF/ON
This procedure assumes that the system has been shut down for some reason.
STEP 1 Turn off the power of the system referring to Chapter 5 How to Turn ON/OFF Whole System.
STEP 2 Turn on the power again referring to Chapter 5 How to Turn ON/OFF Whole System.
STEP 3 Make sure that the system is in normal operation.
STEP 4 Set the current date and time from the PCPro. (Refer to How to Adjust Date and Time.)
STEP 5 Release the indicated alarm. (Refer to How to Stop Alarm Indications.)
Lamp (Color) Status
PWR (Green) On
LINK (Green) On
ACT (Green) On
ALM (Red) On
To Next Page
Loading...
