– 875 –
CHAPTER 7 Maintenance Commands
MBCTC:Make-Busy of Connection Trunk-Continuous for LDM
1. Functional Outline
This command is used to assign the IDLE/BUSY status of connection trunks. By using this command, multiple
trunks can be placed into IDLE/BUSY state simultaneously per a Connection route designated in C_TK
parameter.
2. Parameters
Input data
C_RT: Route Number
C_TK: Trunk Number
Note
MB: Make-Busy Information (0-2)
0=Make Idle
1=Make Busy (Outgoing)
2=Make Busy (Bothway)
Note: Multiple trunks can be assigned simultaneously per a route designated in TK parameter.
To Next Page
Loading...
