NEC UNIVERGE SV8500 - H Bad Call Notification

– 262 –
CHAPTER 3 System Messages
6-H: Bad Call Notification
This message displays to indicate the result of Bad Call Notification.
When type of connection is Station connection
- Station number (see table.)
The called station number
Default Alarm Default Grade Grade Modified Lamp Modified
SUP 2
1: XXXX XXXX XXXX XXXX 2: XXXX XXXX XXXX XXXX 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b3 b2 b1 b0
1 2
3
4
5 6 7 8 9
10
11
12
b0-b3: Station number digit with the fault. [This data is always indicated as
“0” when type of connection is 2 (ACD Trunk).]
b4-b7: Type of connection
0 = Station connection
1 = Trunk connection
2 = ACD Trunk connection
1
b4-b7 b0-b3
DC0 DC1
DC2 DC3
DC4 DC5
2
3
4
2
4
b0-b3: Number of digits for called station number
5