NEC UNIVERGE SV8500 - G CCH B-Level Infinite Loop Failure (Temporary)

– 377 –
CHAPTER 3 System Messages
13-G: CCH B-Level Infinite Loop Failure (Temporary)
This message displays when B-Level infinite loop of the Port Microprocessor (PM) in the CCH/DCH circuit
card has occurred
.
Location of faulty CCH/DCH card
Default Alarm Default Grade Grade Modified Lamp Modified
SUP 1
1: XX00 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b6 b5 b4 b3 b2 b1 b0
1
b0-b4: Group number
b5, b6:Unit (0-3)
b7: 0/1 = Even-numbered MG/Odd-numbered MG
1