NEC UNIVERGE SV8500 - RLST_T Release of Station;Trunk - Telephone Number

– 902 –
CHAPTER 7 Maintenance Commands
RLST_T: Release of Station/Trunk – Telephone Number
1. Functional Outline
This command is used to release a station/trunk, by using Telephone Numbers. This command is only available
at NCN (for FCCS network).
2. Parameters
Input Data
TYPE:
Telephone Number
Trunk
LENS
Connection Trunk
UGN: User Group Number
Note 1
TELN: Telephone Number (maximum 16 digits) Note 1
RT: External/Internal Route Number Note 2
TK: Trunk Number Note 2
LENS: Line Equipment Number Note 3
C_RT: Connection Route Number (1-1023) Note 4
C_TK: Connection Trunk Number (1-4095) Note 4
Note 1:
This parameter is valid when Telephone Number is designated in the TYPE selection list box.
Note 2: This parameter is valid when Trunk is designated in the TYPE selection list box.
Note 3: This parameter is valid when LENS is designated in the TYPE selection list box.
Note 4: This parameter is valid when Connection Trunk is designated in the TYPE selection list box.
Output Data
FPC: Fusion Point Code (1-253)
TN: Tenant Number
Note 1
STN: Physical Station Number (a maximum of five digits for a Business system, and six digits for a Hotel
system)
Note 1