– 783 –
CHAPTER 7 Maintenance Commands
DEBUG:General Purpose Debug Function
1. Functional Outline
This command is used to set necessary data for outputting debug information and displaying it on terminals
connected with LAN.
2. Parameters
Input data
SP/LMG
SP: System Processor
<Trigger>
TRIGGER NUMBER
CONTENTS
0 TCP/IP Module Information
1 Fault Message
2 Digital Telephone Claims
3 IP Telephone RTP Statistics
4 TCP/IP Data Trace
5 SMTP Information
6 SIP Authentication
7 Synchronization (Location Diversity)
8 Registration (Location Diversity)
9 Station Data (Location Diversity)
10 Inter-node IP Address Notification
11 Inter-node Query Process
12 Protocol Handler Error Log
13 TCP/IP module Heap memory Information
14 Node watching information (Location Diversity for PHS)
15 XML IMAT-Various H/I Error Log
16 PHS/SIP station movement log
17 PHS/SIP station error log
19 Extend IP Address Inquiry
To Next Page
Loading...
