– 426 –
CHAPTER 3 System Messages
• Information on Malicious call
Kind of Call (HEX) 10H=Call from a station
Fusion Point Code (FPC) (HEX)
Note 1, Note 3
Tenant number (HEX) Note 1, Note 3
Physical Station number (HEX) Note 1
User Group Number (UGN) (HEX) Note 2, Note 3
Telephone number (HEX) Note 1, Note 3
Note 1:
Each number/code is output in hexadecimal. Detailed meanings are as follows:
Output Data (HEX) Actual Meaning
1~9 o 1~9
A o 0
B o *
C o #
0 o blank
For example:
“1A0” is output for indicating the FPC “10”, and “1A3” for the FPC “103”.
“1A” is output for indicating the Tenant Number “10”.
Note 2: This message is output only when the caller’s User Group Number is “1”.
Note 3: When no Telephone Number is allocated to the connected party’s number in Station-to-Station calls,
FPC, User Group Number, Tenant Number, and Telephone Number data here is output as “0”.
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
6
7
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
7
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
8
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
DC4 DC5
9
b4 - b7 b0 - b3
DC0 DC1
DC2 DC3
10
b4 - b7 b0 - b3 b4 - b7 b0 - b3
DC0 DC1 DC8 DC9
DC2 DC3 DC10 DC11
DC4 DC5 DC12 DC13
DC6 DC7 DC14 DC15
11
8
9
10
11
To Next Page
Loading...
