– 75 –
CHAPTER 2 Operations of SV8500 Server
• SW01-2 (SYS SEL) on EMA card = Downward
• SW01-1 (SYS LOCK) on EMA card = OFF (Downward)
Note: Normally,SW01 should be set to all OFF.
STEP 18 Switch over the CPU ACT/STBY to test the newly replaced CPU card.
• Use CMOD command from PCPro.
STEP 19 Make test calls to see that newly replaced CPU card is operating normally.
STEP 20 Attach the front cover again.
[End]
To Next Page
Loading...
