– 140 –
CHAPTER 2 Operations of SV8500 Server
Figure 2-20 DTFD Command Display Image (Example)
This Figure shows the DTFD command display image (example). The DTFD/DTFDN command should look
similar to this.
Tool Buttons
• Collect Data
Used to collect the Traffic report with regard to the selected Traffic Data TYPE. The result test is shown in
the Data Collection Log display area.
•Stop
Used to quit the currently performed Traffic Data collection.
•Print Log
Used to print out the text data now displayed in the Data Collection Log area
• View Database
Used to view the whole data (based on the selected Traffic Data TYPE), so far stored in the database. More
details are shown in Figure 2-21.
• Clear Database
Used to delete (clear) the whole data (based on the selected Traffic Data TYPE), so far stored in the database.
•Log Colors
Used to designate/change the text font color of the Data Collection Log display area.
•Exit
Used exit this command. (Note that the database contents are not cleared by pressing this button.)
Traffic Data
Check box to specify the Traffic Data TYPE.
Data collecting Log
This area displays the current Traffic
Measurement data, based on the selected
Traffic Data TYPE.
To Next Page
Loading...
