– 160 –
CHAPTER 2 Operations of SV8500 Server
Reference
Data = 02: Calling Party Information (Station Number)
Data = 08: Condition B Information
02 10
O
R
I
G
Tenant
(3 digits)
Station No.
ATTCON No.
RT / TK No.
(6 digits)
ORIG: Originating Source Identification
ORIG = 0: Transmitted data depicts information on Station
ORIG = 1: Transmitted data depicts information on Attendant Console
ORIG = 2: Transmitted data depicts information on Trunk
08 03
C
2
C0 = 0: Call Origination - Direct
1: Call Origination - via ATTCON
2: Call Origination - Direct (Alternate Routing)
3: Call Origination - via ATTCON (Alternate Routing)
4: Call Origination - Direct (LCR Routing)
5: Call Origination - via ATTCON (LCR Routing)
6: Call Origination - Direct (Called No. - first six digits of change code)
7: Call Origination - via ATTCON (Called No. - first six digits of change code)
C1 = 0: -
1: Call Origination by OG Queuing
2: Call Origination by dialing with accounted code
3: Call Origination by OG Queuing & dialing with accounted code
4: Call Origination by Call Forwarding Outside
5: -
6: Call Origination by Call Forwarding Outside & dialing with accounted code
C2 = 0: -
1: Call was transferred
2: Billing is continued
3: Call was transferred & billing is continued
4: Call was transferred to last called party
5: Abandoned Call
C
1
C
0
To Next Page
Loading...
